Samsung Replenish SPH-M580 User Manual page 125

Before You Begin
Here is what you will need to have before you can
successfully establish a connection between your
Samsung Replenish™ and a computer.
microSD card (internally installed prior to start)
compatible USB cable (included)
1.
With the microSD card installed, connect your
device to your computer using a compatible USB
cable. (Wait for the connection to be completed.
When connected, the host computer will
automatically detect your device.)
2.
The USB icon ( ) now appears in the top left
Notifications area on your device.
3.
Tap from the
Mass storage
screen.
Charging uses the connected USB cable to
charge the device via your computer's USB port.
uses the connected USB cable to
Mass storage
provide data communication between the device
and your computer. The device then appears as
an external drive with its own drive letter.
Select USB mode
allows your computer to obtain an
Tethered mode
external data connection by using the device's
wireless data services and a wired USB
connection. Tap USB tethering
mode.
Important:
If you are using your device for Tethering,
you may be prompted for additional
drivers.
The Samsung Mobile Driver
SPH-M580 contains the ADB, CDMA, &
WiMAX drivers that are required for using
either Tethering (Phone as a Modem) or
development tools.
Go to
www.samsung.com
M580 Replenish™ Product page, where you
can navigate to the Support
driver.
The online also provide detailed
FAQ
information about this driver.
A wireless data connection can be done by
using the device's Sprint Hotspot feature
(page 154).
to activate tethering
for
and visit the SPH-
tab to obtain this
2H. microSD Card 111