HELIX DSP MINI MK2 Manual page 22

Connection to a PC
It is possible to freely configure the HELIX
DSP MINI MK2 with our DSP PC-Tool software.
The user interface is designed for easy handling
of all functions and allows an individual adjustment
of each of the six DSP channels. Prior to connect-
ing the signal processor to your PC visit our web-
site and download the latest version of the DSP
PC-Tool software.
Check from time to time for software updates. You
will find the software and a huge knowledge base at
www.audiotec-fischer.com.
We strongly recommend to carefully read the DSP
PC-Tool knowledge base before using the software
for the first time in order to avoid any complications
and failures.
Important: Make sure that the signal processor is
not connected to your computer before the software
and USB driver are installed!
In the following the most important steps how to
connect and the first start-up are described:
1. Download the latest version of the DSP
PC-Tool software (available on our website
www.audiotec-fischer.com) and install it on
your computer.
22
2. Connect the signal processor to your comput-
er using the USB cable that is included in de-
livery. If you have to bridge longer distances
please use an active USB extension cable with
integrated repeater or the optionally available
WIFI CONTROL interface.
3. First turn on the signal processor and then start
the software. The operating software will be up-
dated automatically to the latest version if it is
not up-to-date.
4. Now you are able to configure your HELIX
DSP MINI MK2 with our intuitive DSP PC-Tool
software. Nevertheless, interesting and useful
hints can be found in our knowledge base at
www.audiotec-fischer.com.
Caution: We highly recommend to set the vol-
ume of your car radio to minimum position during
first start-up. Additionally no devices should be
connected to the signal processor until general set-
tings in the DSP PC-Tool software have been made.
Especially if the DSP MINI MK2 will be used in fully
active applications, a wrong setup can destroy your
speakers right away.