Activating Your Phone - Samsung SPH-M320 User Manual

Note Your phone's battery should have enough charge for your
phone to turn on and find a signal, set up your voicemail,
and make a call. You should fully charge your battery as
soon as possible. See "Charging the Battery" on page 16
for details.

Activating Your Phone

If you purchased your phone at a store
activated and ready to use.
If you received your phone in the mail
be activated via the Tools menu prior to its initial use. Once
the process has been completed, confirm your activation by
making a phone call. For detailed setup procedures, see
"Activation via the Tools Menu" on page 3.
Tip Do not press while the phone is being activated.
Pressing cancels the activation process.
Note If you are having difficulty with activation, contact your
service provider.
, your phone should be
, your phone must first
Activation via the Tools Menu
Once you have installed the battery (page 15), you can turn on
your phone by pressing
process.
This procedure will take you through the necessary steps
before initiating your first phone call or using any of the
phone's data features.
1.
Press
Menu > Tools > Activate > Yes
phone will begin to access the Telespree™ self-service
activation system.
2.
Press the navigation key down to highlight
press .
– or –
Press Options (right softkey)
3.
Use the keypad to enter your zip code and press
softkey). This is the zip code that was used during the
account setup process.
4. Re-enter the same zip code and press
Section 1A. Setting Up Service
and begin the self-activation
(left softkey). Your
and then
Start
> Start .
Done
(left softkey).
Done
(left
3