Samsung WW90M6 Service Manual page 27

Part
Heater
WW22N6850NX-A2_SM.indb 25
figure
4. Remove the nut holding the heater and
5. Remove the Heater from the Tub
Description
separate the Heater.
Use box Drivers (Socket size: 10mm)
Caution
Make sure to insert the Heater into the
correct position of the bracket inside the
Tub when reassembling it. Otherwise, there
is a danger of a fire.
Make sure to push it inwards until the
packing part comes into the Tub completely
when reassembling it so that the packing
part is completely stuck to the Tub. Fasten
the holding nut with a force of 5Kgf/ cm2.
If the nut is not fastened properly, there is a
danger of water leaking.
Disassembly and Reassembly _ 25
2018/2/1 17:15:45