Samsung WW90M6 Service Manual page 18

Part
Cover-Back
Belt
16 _ Disassembly and Reassembly
WW22N6850NX-A2_SM.indb 16
figure
2
1
Description
• Unfasten the 4 screws that hold the back
cover in place. Remove the back cover by
sliding it down. (When assembling, slide the
back cover up.)
1. Remove the Cover back .
2. Separate the belt and then assembly it.
3. Check if the belt position is at the center of
the Pulley.
Assembling the belt Place the belt
around the Motor-Pulley (①) and then
2
over the Pulley (②).
1
2018/2/1 17:15:35