Advertisement
Tools and Materials (not supplied)
Silicone Sealant
Before You Begin
CAUTION: Risk of personal injury. This bath is extremely heavy. Obtain sufficient help and use lifting
straps to carefully lift or move the bath.
IMPORTANT! To ensure a successful installation, install the bath on a level finished floor.
Observe all local plumbing and building codes.
IMPORTANT! The drain components, drain cover and gaskets are included in a small box within the carton.
Make sure you locate and retain the small box before discarding the carton and packing material.
Unpack and inspect the bath for damage. Return the bath to the carton until installation.
To simplify future maintenance, make sure all plumbing connections around the bath are easily accessible.
Carefully plan moving the bath into the installation area. This bath is heavy and will not easily fit through
doorways.
Install the bath to an adequately supported, level finished floor.
This bath is designed for freestanding installation only.
This bath features an integral, cast overflow.
Install a floor- or ceiling-mounted bath filler with this freestanding bath.
Illustrations shown may not look like your actual product but they still apply to this installation.
This bath conforms to CSA B45.5/IAPMO Z124. All dimensions are nominal.
1329949-T01-B
Sealant Tape
Rubber Mallet
Plus:
• Drop Cloth
• Lifting Straps
• Shims
• 1.8m Supports more than 25mm thick
• Common Woodworking Tools
• 1-1/2" PVC Pipe
(Approximately 15cm Long)
2
© Copyright Kohler China Investment Co., Ltd. 2019
© 版权为科勒（中国）投资有限公司所有 2019
Advertisement
