Switching Temporarily To Tone Dialling - Canon SmartBase PC1270D Fax Manual

SB_PC1270D_FG_EN.book Page 2 Monday, February 18, 2002 12:20 PM

Switching Temporarily to Tone Dialling

Many information services for banks, airline reservations, hotel reservations, etc., require tone dialling for their services. If your
machine is connected to a rotary pulse line, follow this procedure to set the machine temporarily for tone dialling:
• The Function key will light up by pressing Function to be able to operate Tone/+.
1
Press FAX to set to Fax Mode.
2
Pick up the handset of your telephone.
3
Enter a destination using the numeric keys on your telephone or using a
one-touch speed dialling key, coded speed dialling codes, Redial/Pause
key or the numeric keys on the machine.
4
When the recorded message of the information service answers, press
Tone/+ to switch to tone dialling.
• When Tone/+ is pressed, T is displayed in the LCD.
• If your telephone line uses tone dialling, go to the next step.
5
Use the numeric keys on the machine to enter the numbers requested by
the information service.
• Numbers entered after pressing Tone/+ will be dialled using tone dialling.
• After pressing Tone/+, you cannot use the numeric keys on the telephone. Use
the numeric keys on the machine.
6
If you want to receive faxes, press Start.
7
Hang up to disconnect the call.
• Tone dialling is cancelled when you disconnect the call.
6-2
FAX 03/12 2001 15:30
FaxTel STANDARD
Ex:
TEL=
Ex:
TEL= T34
Ex:
T