Resonance or fluid noise, e.g. loud whistling and vibrations in case of
unfavorable arrangement of the press module in the press!
Danger of hearing damage! Material damage to the valves!
▶ Wear ear protection.
▶ In this case, contact a service engineer.
Hot surfaces at press modules, e.g. at valves and valve solenoid coils!
Risk of burning!
▶ Avoid contact with the press module during operation.
▶ Only touch the surfaces of the press module with heat-resistant protective
clothing, e. g. gloves, or do not work at hot surfaces.
▶ Allow the valves to cool down sufficiently before touching them.
▶ Observe the protective measures of the system manufacturer.
▶ If necessary, attach protective covers.
Contact with hydraulic fluid!
Health hazard/impairment of health, e.g. eye injuries, skin lesions, poisoning due to
inhalation and swallowing!
▶ Avoid contact with hydraulic fluids.
▶ When dealing with hydraulic fluids, you must implicitly observe the safety
instructions of the hydraulic fluid manufacturer.
▶ Use your personal protective equipment, e. g safety goggles.
▶ If however hydraulic fluid comes into contact with the eyes or enters the
bloodstream or is swallowed, consult a doctor immediately.
Slip hazard due to oily surfaces!
Risk of injury!
▶ Protect and mark the danger zone.
▶ Immediately remove leaked hydraulic fluid.
▶ Use an oil binding agent in order to bind the leaked hydraulic fluid.
▶ Remove and dispose of the contaminated oil binding agent, see chapter 13
"Disposal".
▶ Wear the protective equipment, e.g. safety shoes, prescribed for your activity.
Safety instructions | Press modules Type IH04
WARNING
CAUTION
RE 63124-B, Edition: 08.2021, Bosch Rexroth AG
13/56