Table of Contents
Advertisement
General information on damage to property and damage to product | Press modules Type IH04
Improper cleaning!
Damage to property!
▶ Cover all openings with the appropriate protective fittings / plugs / protective
caps in order to prevent cleaning agents from penetrating the system.
▶ Check that all seals and electric plug-in connectors are firmly fitted to prevent
the penetration of cleaning agents.
▶ Do not use aggressive and/or easily inflammable cleaning agents for
cleaning. Clean the product using a suitable cleaning liquid and residue-free
industrial wipes.
Leaking or spilled hydraulic fluid!
Environmental pollution and contamination of the ground water!
▶ Immediately remedy possible leakage.
▶ If hydraulic fluid is spilled, use an oil binding agent.
▶ Observe the information in the safety data sheet of the hydraulic fluid and the
system manufacturer's provisions.
Environmental pollution caused by incorrect disposal!
Environmental pollution! Damage to property!
▶ Dispose of the press module, the hydraulic fluid and the packaging in
accordance with the applicable national regulations in your country.
▶ Dispose of the hydraulic fluid according to the applicable safety data sheet of
the hydraulic fluid.
ONLY FOR ELECTRIC COMPONENTS!
Uncontrolled disconnection and connection of plug-in connectors!
Damage to property!
▶ Before installation works, separate the device from the mains or from the
voltage source or de-energize it.
▶ Do not plug in or pull off the electric plug-in connector as long as the voltage
supply is activated.
NOTICE
RE 63124-B, Edition: 08.2021, Bosch Rexroth AG
17/56
Advertisement
Table of Contents
