Specifications And Environmental Conditions; Specifications; Environmental Conditions - Fluke 9116A User Manual

2 Specifications and Environmental
Conditions
2.1

Specifications

Temperature Range
Accuracy
Stability
Uniformity
Control Probe
Resolution
Readout
Controller
Fault Protection
Cutout Accuracy
Power
Heater
System Fuses
Exterior Dimension
Weight
Safety
2.2

Environmental Conditions

Although the instrument has been designed for optimum durability and trou-
ble-free operation, it must be handled with care. The instrument should not be
operated in an excessively dusty or dirty environment. Maintenance and clean-
ing recommendations can be found in the Maintenance Section of this manual.
The instrument operates safely under the following conditions:
• ambient temperature range: 5 - 50°C (41 - 122°F)
• ambient relative humidity: maximum 80% for temperature <31°C, de-
creasing linearly to 50% at 40°C
• pressure: 75kPa - 106kPa
• mains voltage within ± 10% of nominal
550°C to 1100°C (1022°F to 2012°F)
±3.0°C
±0.15°C
±0.05°C
10Ω HTPRT
0.1°C/°F below 1000°C/°F
1°C/°F above 1000°C/°F
Switchable °C or °F
Digital controller with data retention
High temperature cutout (Type R cutout thermocouple)
Sensor burnout and short protection
±10°C
230 VAC (±10%), 50/60 Hz, 2500 W
2500 W
15 A 250 V fast acting
838 mm H x 610 mm W x 406 mm D (33 x 24 x 16 in)
82 kg (180 lb.)
EN 601010-1, CAN/CSA C22.2 No. 601010.1-04
7