Table of Contents
Advertisement
Troubleshooting floppy disks
My USB floppy disk drive cannot write to a floppy disk
The floppy disk is write-protected. Disable the write-protect feature or use a floppy disk that is not write-protected.
Check that the disk is properly inserted into the floppy disk drive.
Your disk may be corrupt. Try to insert another floppy disk.
The optional PCGA-UFD5/A (USB) floppy disk drive is not recognised as drive A
To set the UFD5/A to A, proceed as follows:
1
Turn the system power on.
2
Connect the UFD5/A.
3
Select Control Panel from the Start menu.
4
Click Performance and Maintenance.
5
Click System.
6
Select the Hardware tab, then click Device Manager.
7
Select Universal Serial Bus controllers, then Y-E Data USB Floppy.
8
From the Action menu, click Uninstall.
9
Keep clicking OK until the Confirmation of deletion of device message appears.
10 Select Scan for hardware changes from the Action menu.
The UFD5/A is recognised as drive A.
n N
82
Connecting peripheral devices
Advertisement
Table of Contents
Troubleshooting
