Connecting A Projector - Sony PCG-K315B Hardware Manual

Connecting a projector

To connect a projector, proceed as follows:
1 Connect the power cord (1) of the projector into an AC outlet.
2 Plug the RGB signal cable (2) into the monitor/VGA connector (3) a on the computer.
3 Plug the audio cable (4) (not supplied) into the earphone connector (5) i.
4 Plug the RGB signal cable and the audio cable into the connectors on the projector (6).
Under certain circumstances, you may not be able to display the computer LCD screen and an external display or a projector at the same time.
You can toggle the output between the computer LCD-screen and the external monitor by pressing the key combination <Fn>+<F7>.
n N
67
Connecting peripheral devices