Installing/Uninstalling Software; Installation Procedure - Canon imageCLASS MF6500 Series Starter Manual

Installing/Uninstalling Software

Installation Procedure

Before Installation:
• Do not connect the USB cable before installing the
software. If you connect the USB cable before
installing the software and the Found New Hardware
Wizard screen appears, click [Cancel].
• For Windows 2000/XP/Server 2003, logon as
Administrator to install the software.
• Make sure the machine is turned on before connecting
the USB cable.
• On the screen shown at each step, click on the circled
button to proceed.
3
If the MF6500 Series CD-ROM
Setup screen is not displayed,
on the Windows desktop
double-click [My Computer].
Open the CD-ROM icon, then
double-click [MInst (MInst.exe)].
7 8
15
System Requirements
Microsoft Windows 98/98SE
CPU: Intel Pentium/66 MHz or faster
Memory: 128 MB or more
Available Hard Disk Space: 460 MB or more
Microsoft Windows Me
CPU: Intel Pentium/150 MHz or faster
Memory: 128 MB or more
Available Hard Disk Space: 460 MB or more
Microsoft Windows 2000
CPU: Intel Pentium/133 MHz or faster
Memory: 128 MB or more
Available Hard Disk Space: 460 MB or more
4
9
For USB Connection
Microsoft Windows XP (32-bit version)
1
CPU: Intel Pentium/Celeron series
233 MHz or faster
Memory: 128 MB or more
Available Hard Disk Space: 460 MB or
more
Microsoft Windows Server 2003
(32-bit version)*
CPU: Intel Pentium/Celeron series
133 MHz or faster
Memory: 128 MB or more
Available Hard Disk Space: 460 MB or
more
* Only for network connection.
5
NOTE
Installation of PageManager and
OmniPage is required only for the
MF6530/6531/6550.
(PageManager and OmniPage
are not supplied with the
MF6560/6580.)
10 11
2
6
12
16