Connecting Video Recorder Via Av Cable - Loewe Contur 2063 Operating Instructions Manual

TV menu
Standard settings
Picture
Sound
Programmes
AV connections
Child lock
On-screen display
Other ...
O K
C) Select the line "Programmes".
D) Confirm with OK.
E) In the "Programmes" menu, select the line
"Setting manually".
F) Confirm with OK.
G) In the menu, select the line "Channel".
H) Set channel E30 using the number keys.
I) Disconnect the aerial cable (1) from the "RF
in" aerial input of the video recorder.
K) Start the search by pressing the blue button.
(2)
ARIAL
RF—OUT
The search will stop when the video
recorder transmitter has been found.
L) Press the red button to save this.
Channel zero (VCR) should be highlighted in
blue in the displayed channel preview.
M) Press the red button again to save the video
recorder transmitter.
N) Then connect the aerial cable (1) to the "RF
in" aerial input of the video recorder again.
Connecting Video
Recorder via AV Cable
Back
M
End
E
Connect a video recorder to AV socket 1 or 2
via an AV cable (scart cable). It is also possible
to connect two video recorders.
RF-IN
RF—OUT
Advantages of connecting this way:
• Better picture and sound playback.
• Stereo sound playback possible.
• For two sound recordings, Sound 1 or
Sound 2 can be selected.
(1)
• A hidden Loewe video recorder can be
controlled using the TV remote control.
• It is possible to use the timer function of the
TV set to turn on/off the Loewe video
recorder for making recordings. This is a
particular advantage if the TV set is
equipped for receiving satellite channels. If
this is the case, you can record these
channels with the video recorder.
AV1 (TV)
Setting Video Signal Type:
This setting depends on the connected video
recorder or video equipment and can be carried
out in the "AV Connections" menu.
The "AV Connections" menu can be called up
from "Main Information" or from the "TV
menu".
A) Press the button to call up "Main
i
Information".
B) Select the line "AV Connections".
C) Confirm with OK.
AV connections
At AV1 (programme 199)
At AV2 (programme 198)
At AVS (programme 197)
Decoder programmes
For programmes 1... 196
O K
D) Select the AV connection to which the video
equipment is connected, e.g. "AV 2"
(channel 198).
At AV2 (programme 198)
Signal: Standard component(s):
Autom. -VHS/SVHS
VHS/8mm ..............
SVHS/Hi8 ..............
Autom. -CVBS/YC .
CVBS .....................
YC .........................
Audio .....................
RGB .......................
no
Select and
O K
proceed with OK
E) Select the signal type for the connected
video equipment.
Back
M
End
E
VCR, Camcorder
VCR, Camcorder
VCR, Camcorder
Disc, SAT, Decoder
Disc, SAT, Decoder
SAT, Decoder, Disc
Radio
Game console
M Back
End
E
19