Ricoh Pro C5300S Operating Instructions Manual page 134

8. Installing the Printer Driver
• Address: Enter the IP address of the machine.
• Protocol: Select [HP JetDirect].
• Use: Check that the machine name is displayed. If "Generic PostScript Printer" is displayed,
the entered IP address may not be correct.
When "Generic PostScript Printer" is displayed even though the IP address is correct
Perform the following procedure to select the PPD file of the machine:
1. Select [Select Software...] on "Use".
2. Select the machine on the "Printer Software" screen, and then click [OK].
9. Click [Add].
The progress screen is displayed.
If the progress screen does not close after a while, click [Configure...] or [Settings] and configure
the option configuration of the printer.
132
DZC098