Toro 98-2671 Installation Instructions

The original handle for lawn mower model 20700 is no
longer available. Install the replacement handle provided
in the handle kit according to these instructions.
Contents of the Kit
DESCRIPTION
Upper handle
Lower handle
Handle latches
Long shoulder screws
Short shoulder screws
Locknuts
Spacers
Handle pins
Handle knobs
Handle screws
Removing the Original Handle
1. Remove the throttle control from the upper handle
(Fig. 1).
2. Remove the cable clip from the handle, and move the
throttle control and the throttle cable away from the
upper and lower handles (Fig. 1).
3. Remove the knobs and screws that secure the upper
handle to the lower handle (Fig. 1).
The Toro Company
2001
All Rights Reserved
Replacement Handle Assembly
for Part No. 11-2239
Part No. 98-2671
QUANTITY
1
1
2
2
2
6
2
2
2
2
1. Lower handle
2. Throttle control
3. Upper handle
4. Knob (2)
4. Remove the lower handle from the lawn mower deck
5. Remove the handle latches from the lawn mower deck
6. Discard the upper and lower handles, the handle
1
Installation
Instructions
Figure 1
(Fig. 1).
(Fig. 1).
latches, the knobs, and the old hardware.
Form No. 3324-739
5. Lawn mower deck
6. Cable clip
7. Handle latch (2)
Printed in USA