Table of Contents
Advertisement
■
Do not point the blower nozzle in the
direction of people or pets.
■
Never place objects inside the blower
tubes.
■
Do not operate the product near open
windows, etc.
■
Slightly
dampen
conditions.
■
Do not place blower on top of or near loose
debris. Debris may be sucked into intake
vent resulting in possible damage to the
product.
TRANSPORTATION AND STORAGE
For assembling with petrol-driven power
head
■
Stop the engine and allow it to cool before
storing or transporting.
■
Clean all foreign material from the product.
■
Drain all fuel from the tank into a container
approved for petrol. Remember to properly
replace and tighten the fuel cap.
■
If applicable, drain all lubricant from tank
into a container approved for lubricant.
Remember to properly replace the lubricant
cap.
■
Run the engine until it stops, this will
remove all fuel that could become stale and
leave varnish and gum in the fuel system.
■
Store the product in a cool dry and well-
ventilated place that is inaccessible to
children. Keep away from corrosive agents,
such as garden chemicals and de-icing
salts.
■
Do not store outdoors.
■
When transporting the product in a vehicle,
secure it against movement or falling to
prevent injury to persons or damage to the
product.
■
Never carry or transport the product while
the engine is running.
■
Abide
by
all
government
regulations for the safety storage and
handling of petrol.
Short term (less than 1 month)
■
Stop the engine and allow it to cool before
storing.
■
Clean all foreign material from the product.
4
surfaces
in
dusty
and
local
■
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children.
■
Keep away from corrosive agents such as
garden chemicals and de-icing salts.
■
Do not store outdoors.
For assembling with electric-driven power
head
■
Stop the product, disconnect from the
power supply, and wind the cable. Allow
the product to cool before storing or
transporting
■
Clean all foreign material from the product.
Store it in a cool, dry, and well-ventilated
place that is inaccessible to children. Keep
it away from corrosive agents, such as
garden chemicals and de-icing salts. Do
not store outdoors.
■
For transportation, secure the product
against movement or falling to prevent
injury to persons or damage to the product.
For assembling with battery-driven power
head
■
Stop the product, remove the battery pack,
and allow it to cool down before storing or
transporting.
■
Clean all foreign materials from the product.
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children. Keep away from corrosive agents,
such as garden chemicals and de-icing
salts. Do not store outdoors.
■
For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
Transporting lithium batteries
Transport the battery pack in accordance with
local and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
battery packs that are cracked or leaking.
Check with the forwarding company for further
advice.
Advertisement
Table of Contents
