Page 1
ORIGINAL INSTRUCTIONS Jet Blower Attachment AJB01...
Page 2
Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modification.
Safety, performance, and dependability have ill, or under the influence of alcohol, drugs, been given top priority in the design of your jet or medicine. blower attachement. PREPARATION ■ Some regions have regulations that restrict INTENDED USE the use of the product to some operations. The jet blower attachment is approved for Check with your local authority for advice.
Page 4
■ Clear the work area before each use. ■ Before every use, examine the power cord Remove all objects such as rocks, broken for damage. If there are signs of damage, glass, nails, wire, or string which can be it must be replaced by at an authorised blown a considerable distance by high service centre.
Page 5
■ When battery pack is not in use, keep it away ■ Operating similar tools nearby increases from other metal objects, like paper clips, both the risk of hearing injury and the coins, keys, nails, screws or other small potential for other persons to enter your metal objects that can make a connection working area.
■ Do not point the blower nozzle in the ■ Store the product in a cool, dry, and well- direction of people or pets. ventilated place that is inaccessible to children. ■ Never place objects inside the blower tubes. ■ Keep away from corrosive agents such as garden chemicals and de-icing salts.
■ Hearing injury caused by exposure to noise MAINTENANCE Wear hearing protection and limit – exposure. WARNING ■ Injury from flying objects from the blow tube only original manufacturer’s airflow replacement parts, accessories, Wear adequate eye protection at all – attachments.
WARNING Rotating fans. Keep hands and Indicates a potentially hazardous situation, feet out of openings while the which, if not avoided, could result in death product is running. or serious injury. CAUTION Wear ear protection. Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
PRODUCT SPECIFICATIONS Blower attachment Model AJB01 Weight (blower attachment 2.25 kg only) For assembling with petrol-driven power head (below values are measured on RPH2540 or RLT254FSDSN power head) Air velocity 225 km/h Air volume 807 m Weight (with petrol-driven 4.0 kg power head) Fuel tank volume 580 mL...
Page 22
Imported by: Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited 2 Landing Drive, Mangere Auckland, 2022, New Zealand 960087173-01...