Ricoh Pro C9200 Manual page 31

inspection patterns. Provided there are margins at both the top and the bottom of the printed paper,
identification numbers will be added if you check the box.
It is recommended to add identification numbers in order to search the printed copies for pages with
print defects.
[Leading edge]: The identification number is added at the leading edge of the printed paper.
[Trailing edge]: The identification number is added at the trailing edge of the printed paper.
A space of 2.7 mm (0.1 inches) is required for adding the ID Number. If the margins are set to the
default, a margin of 6.7 mm (0.3 inches) is required at either the top or the bottom.
• The margins required for adding identification numbers are as given below. The required margins
vary depending on whether or not detection for [Image Position Feedback Correction] is in effect.
Without detection marks
1 1 2 2 2
3 3
1234
4 4
5
M0B1IC0017
1. Margins (vertical): 4.0 mm (0.16 inches) by default
2. 2.7 mm (0.1 inches)
3. 1.0 mm (0.04 inches) (Space for printing inspection patterns)
4. Margins (horizontal): 2.0 mm (0.08 inches) by default
5. ID Number
With detection marks for [Image Position Feedback Correction]
1 1 2 2 2
1234
3 3
6
4 4
5
M0B1IC0018
Threshold Setting
29