The following icons appear on the LCD monitor (or viewfinder) if it is set
to Information View display.
[Continuous] [Shoot Only]
2
Press the MENU button.
Camera shake may not be fully corrected when shooting with slow
shutter speeds, such as with evening shots. In this case, affix the
camera to a tripod.
If camera shake is too strong, it may not be fully corrected.
[Panning] is recommended for use when shooting while moving the
camera horizontally.
Hold the camera horizontally while panning (stabilization does not work
when the camera is held vertically).
Photo Tips and Information (p. 174)
Reviewing an Image Right After Shooting
Mode Dial
After a photo is taken, the image displays for two seconds (to change this
setting, see page 37). There are two ways to display the image longer:
- Keeping the shutter button pressed after a shot.
- Pressing the SET button while the image is displayed
36
[Panning]
With no lens converter
With separately sold teleconverter
mounted
With separately sold wide converter
mounted
–
p. 158
p. 158