Canon PowerShot S2 IS User Manual page 99

Changing the Save Method for the Original Image
When you are shooting still images in a My Colors mode, you can specify
whether or not both the altered image and the original image are
recorded.
1
In the [ (Rec.)] menu, select [Save
Original].
See Selecting Menus and Settings (p. 73).
2
Use the or
or [Off] and press the MENU button.
The display will return to the shooting screen.
Select [On] to record the original image too or
[Off] to not record it.
When [On], images are numbered
sequentially. The original image has the lower
number, and the altered image shot with My Colors has the higher
number.
[Save Original] is Set to [On]
Only the altered image is shown in the LCD monitor (or viewfinder)
during shooting.
The image that appears in the LCD monitor (or viewfinder)
immediately after recording is the altered image (p. 95). If you erase
the image at this point, the original image is erased along with the
altered image. Exercise adequate caution before deleting a file.
Two images are recorded with each shot, so the number of available
shots displayed on the LCD monitor (or viewfinder) is halved.
button to select [On]
6
97