Canon Rebel T2i EOS 550D Instruction Manual page 209

Transmission status icon
H
(Gray) Not connected : No connection with access point.
H
(Blinking) Connecting : Connecting with access point.
H
(Displayed) Connected : Connection to access point established.
H
( ) Transferring
Cautions for Using Eye-Fi Cards
If "J" is displayed, an error occurred while retrieving the card
information. Turn the camera off and on again.
Even if [Eye-Fi trans.] is set to [Disable], it may still transmit a signal. In
hospitals, airports, and other places where wireless transmissions are
prohibited, remove the Eye-Fi card from the camera.
If the image transfer does not work, check the Eye-Fi card and personal
computer settings. For details, see the card's instruction manual.
Depending on the wireless LAN's connection conditions, the image
transfer may take longer or might be interrupted.
Because of the transmission function, the Eye-Fi card may become hot.
The battery power will be consumed faster.
During the image transfer, auto power off will not take effect.
Check the [Access point SSID:].
5
Check that an access point is
displayed for [Access point SSID:].
You can also check the Eye-Fi card's
MAC address and firmware version.
Press the <M> button three
times to exit the menu.
Take the picture.
6
The picture is transferred and the
<H> icon switches from gray (Not
connected) to the icons below.
For transferred images,
displayed in the detailed information
display (p.58).
: Image transmission to access point in
progress.
Using Eye-Fi Cards
is
209