Canon Rebel T2i EOS 550D Instruction Manual page 168

Viewing the Images on TV
Do not connect any other device's output to the camera's <D>
terminal. Doing so may cause a malfunction.
Some TVs might not be able to display the captured images. In such a
case, use the provided AV cable to connect to the TV.
The camera's <q/C> terminal and <D>
terminal cannot be used at the same time.
For HDMI CEC TV sets
When a TV set compatible with HDMI CEC* is connected to the camera with the
HDMI cable, you can use the TV set's remote control for playback operations.
* A function enabling you to control multiple HDMI devices with one remote control unit.
168
Select [Ctrl over HDMI].
1
Under the [4] tab, select [Ctrl over HDMI], then
press <0>. Select [Enable], then press <0>.
When the camera is connected to a TV
set, the TV set's input will automatically
switch to the HDMI port connected to the
camera. When you press the camera's
<x> button, you can use the TV set's
remote control for playback operations.
Select the image.
2
Point the remote control to the TV set
and press the
image. Then press the Enter button.
The menu will appear. The menu displayed
will differ for still photos and movies.
Press the
option, then press the Enter button.
For a slide show, press the remote
control's / button to select an
option, then press the Enter button.
Select [Return] and press the Enter
button. The menu will disappear and you
can use the
/ button to select the
/ button to select an
/ button to select an image.