Set The Printing Effects - Canon Rebel T2i EOS 550D Instruction Manual

wPrinting
Printing Effect
EOn
EOff
EVIVID
ENR
0 B/W
0 Cool tone Prints in black-and-white with cool, bluish blacks.
0 Warm tone Prints in black-and-white with warm, yellowish blacks.
zNatural
zNatural M
EDefault
* When you change the printing effects, it is reflected in the image displayed
on the upper left. Note that the printed image might look slightly different
from the displayed image which is only an approximation. This also
applies to [Brightness] and [Adjust levels] on page 182.
180

Set the printing effects.

4
The image will be printed according to the printer's standard
colors. The image's Exif data is used to make automatic
corrections.
No automatic correction will be applied.
The image will be printed with higher saturation to produce
more vivid blues and greens.
The image noise is reduced before printing.
Prints in black-and-white with true blacks.
Prints the image in the actual colors and contrast. No
automatic color adjustments are applied.
The printing characteristics are the same as the "Natural"
setting. However, this setting enables finer printing
adjustments than with "Natural."
The printing will differ depending on the printer. For details, see
the printer's instruction manual.
Set as necessary. If you need not set
any printing effects, go to step 5.
What is displayed on the screen
differs depending on the printer.
Select the option on the upper right
(circled in the screenshot), then press
<0>.
Select the desired printing effect, then
press <0>.
If the <e> icon is displayed next to
<z>, you can also adjust the
printing effect (p.182).
Description