Advertisement
DISPLAY AND CONTROL PANEL
1. The three digit display and 24-hour programmable digital timer allow the coffee urn to
start at a desired time.
2. Programmable temperatures range from 155°F / 68°C to 205°F / 96°C, allowing the
coffee urn to adjust to the desired temperature before, during and after brewing process.
3. The power and ready lights are illuminated during the brewing cycle. The coffee urn
is on when the power (red) light is illuminated. The ready (green) light blinks until
the brewing is completed. After one hour, the LED will change from "006" to "005". After
6 hours, the coffee urn will automatically shut off. The power (red) light will remain on
indicating that the coffee urn is still plugged into an AC wall outlet.
4. The coffee urn set-up mode is fixed to 205°F / 96°C. When brewing is finished, the
coffee urn automatically switches to the keep-warm cycle. The display will read "006"
which indicates the keep warm cycle will keep the coffee warm for 6 hours. After
6 hours, the coffee urn will display "000" and then automatically shut off for safety.
The keep-warm cycle can be adjusted by pressing the time button.
5. "Time" is a brewing timer. The default keep-warm time is 6 hours. The keep-warm
time can be adjusted from 1 hour to 12 hours by pressing the "time" button.
6. "Temp" is the brewing temperature. The default temperature is 205°F / 96°C. The
temperature can be adjusted while brewing from 155°F / 68°C to 205°F / 96°C by
pressing the "temp" button.
7. "Delay Start" is a delay timer. The delay start setting ranges from 1 hour to 24 hours.
The delay start can be set by doing the following:
• Fill the coffee urn with cold water and coffee in the basket.
• Plug the power cord into a 120 volt AC wall outlet.
• Set the delay time by pushing "delay start" until the desired serving time is reached.
Advertisement
