Table of Contents
Advertisement
2.4. Re-Write For DVD Firmware
2.4.1.
Turn on the power, and set the DVD mode.
2.4.2.
Confirm that the "OPEN" will be appeared on the screen.
2.4.3.
Insert the Up-Date Disc. Automatic read will start and "Upgrade file detected, Upgrade?
Press PLAY key to start" will be displayed on the screen.
2.4.4.
Press PLAY button on the remocon to start upgrade.
NOTE: Do not turn off the unit on the way or operate the keys on the unit and remocon.
Up-Date error will happen and can not be done with the Up-Date of Up-Date Disc.
2.4.5.
After the Up-Date, Logo screen will appear.
2.4.6.
Unplug the AC cord, then plug it in.
CHECK FOR THE FIRMWARE VERSION
2.4.7.
Turn on the power, and set the DVD mode.
2.4.8.
Press "SETUP" "SUBTITLE" "1" "2" "3" button on the remote control. Firmware version will
be displayed on the top bottom of the screen.
080620
When the changed version displays, the Re-write will be completed.
2.4.9.
Turn off the power.
ViewSonic Corporation
080620
14:14 SASn 4
14:14
SASn 4
Fixed
Release date (Example: 2008.6.20, 14:14)
24
Confidential - Do Not Copy
N2201w-1M
Advertisement
Table of Contents
