ViewSonic N3735w-2M Service Manual page 8

Power Consumption:
Normal
Interference with RF and
Video
Electromagnetic
Compatibility
Power Supply Transient
Immunity
(Supply Transients and
Outage)
Surge Immunity Test
Power Supply Missing
Cycle Immunity
Power Supply Acoustics
Efficiency
Leakage Current
Power Saving(DPMS)
Recovery Time
Power Factor Correction
5. Firmware & OSD
The product firmware of VS11771-2M shall have a firmware version of V:P01 or later version.
Any changes/revisions afterward shall also be pre-approved by ViewSonic in written. For
VS11771-2M, its firmware shall have a built-in frequency table for NTSC/ATSC off-air
TV/CATV, Closed-Caption, and with MTS implementation.
All audio/video and other output adjustments shall be performed by using an On Screen Display
(OSD) via a Remote Control Unit (RCU) adjustment. The following tables list the OSD
functions supported by VS11771-2M.
OSD
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Balance
Bass
Treble
Surround
Reverb
Equalizer
SPDIF Type
Auto Volume Control
Tuner Mode
Auto Scan
Channel Skip
MTS
Audio Language
OSD Language
ViewSonic Corporation
Normal: 180 W Max: 200W // Stand by: < 1 W@115Vac
There shall be no visible interference between power supply, RF and
video signals. This applies to all available RF channels and video modes.
This product shall adhere to the compatibility and immunity
specifications in FCC.
Able to withstand an ANSI / IEEE C62.41 – 1980 2000V ring wave
with no damage.
Able to withstand 1.25X nominal Line Voltage for one cycle with no
damage.
Function properly without reset or visible screen artifact when 1/3 cycle
of AC Power is randomly missing.
Power supply shall not produce any audible noise during startup and
normal operation. Audible shall define to be in compliance with ISO
7779 (DIN EN27779: 1991) . Power Switch noise shall be Excluded.
>= 80% @ full load, nominal line
<0.5mA @ 240VAC
< 1 W (only for VGA source)
< 10 sec.
Compliant with EN61000-3-2
Picture effect selections on Cinema, Sport, Vivid, Hi-bright, and User
Adjust the Black levels
Adjust the White levels
Adjust the Color levels
Adjust the Tint levels
Adjust the Sharpness levels
Selections on Normal, Warm, user, Cold
Adjust the Speak output levels
Adjust the Low Frequency levels
Adjust the Hi Frequency levels
Surround sound effect On or Off
Reverb Sound effect selections on Concert, Living Room, Hall, Bathroom,
Cave, Arena, Church, and Off the effect
Equalizer effect selections on Rock, POP, Live, Dance, Techno, Classic, Soft,
and Off the sound effect.
SPDIF output selections on PCM, Dolby Digital and Off the output.
Auto set the same sound level between different TV channels.
Selections TV sources to Air or Cable
TV program Auto Search
TV channel Add or Delete
TV Audio Selection on Mono, Stereo and Sap sound
Audio Language Selections on English, Spanish, and French
OSD Menu Language Selections on English, Spanish, and French
5
Confidential - Do Not Copy
N3735w-2M