ViewSonic N3735w-2M Service Manual page 28

Annotations for OSD Menu Items
See below for meanings of the control items in each menu.
Video menu
Picture Mode: To select picture mode.
•
Noise Reduction: To reduce the noise level of connected
•
equipment.
Brightness: To adjust luminance of video.
•
Contrast: To adjust contrast of video.
•
Color: To adjust color.
•
Tint: To adjust tint level.
•
Sharpness: To adjust picture sharpness.
•
Back Light: To brighten or darken the backlight.
•
Color Temperature: To select color temperature.
•
Auto Adjust: To auto adjust picture's horizontal
•
position, vertical position, fine tune and H-Size. (only
enabled in VGA source)
VGA: To fine tune the image. (only enabled in VGA
•
source)
＊H. Position: To adjust the horizontal position of the
picture.
＊V. Position: To adjust the vertical position of the
picture.
＊Phase: To adjust delay time of phase in order to
reduce the noise of picture.
＊Clock: To adjust delay time of clock in order to
reduce the noise of picture.
Audio menu
Balance: To adjust left and right audio balance.
•
Bass: To adjust bass.
•
Treble: To adjust the treble.
•
Surround: To select concert hall effect "On" or "Off".
•
Reverb: To select the reverb sound effect.
•
Equalizer: To select equalizer modes.
•
SPDIF Type: To select audio for SPDIF out.
•
Auto Volume control: To turn On or Off Auto volume
•
control.
Audio Only: To turn off the screen picture but keep the
•
sound on.
TV menu
Tuner Mode: To select TV source. Select "Cable" to
•
watch cable TV channels, and select "Air" to watch air
TV channels.
Auto Scan: To auto scan TV and DTV channels.
•
Channel Skip: To skip channels.
•
MTS: To select audio mode.
•
Audio Language: To select available audio language.
•
ViewSonic Corporation
25
Confidential - Do Not Copy
N3735w-2M