Sony DVP-NS92V Operating Instructions Manual page 50

Notes
• When you select one of the surround modes, turn
off the surround setting of the connected TV or
amplifier (receiver).
• Not all discs will respond to the "TVS NIGHT"
function in the same way.
• To enjoy the multichannel audio through the
5.1CH OUTPUT jacks, correctly set each speaker
position and distance (page 21, 80).
• When the playing signal does not contain a signal
for the rear speakers, you cannot hear the TVS
effect.
• When you select one of the TVS modes, the
player does not output the sound of center
speaker.
• Make sure that your listening position is between
and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.
• If you use the DIGITAL OUT (OPTICAL or
COAXIAL)/HDMI OUT jack and set "DOLBY
DIGITAL" to "DOLBY DIGITAL," "MPEG" to
"MPEG," and "DTS" to "DTS," in "AUDIO
SETUP", sound will come from your speakers but
it will not have the SURROUND effect.
• The surround effects do not work when using the
Fast Play or Slow Play functions, even though you
can change the surround modes.
50