Sony DVP-NC600 Operating Instructions Manual page 31

M Press ENTER.
Quick Setup is finished. All connections and setup operations are complete. If your AV
amplifier (receiver) has an MPEG audio decoder, set "MPEG" to "MPEG" (page 69).
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select "QUICK" under SETUP in the Control Menu (page 63).
Enjoying the surround sound effects
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in pages 22 to 26
( through ). Each of these are the default settings and do not need to be adjusted when
B D
you first connect the player. Refer to page 63 for using the Setup Display.
Audio Connection (pages 21 to 26)
A
No additional settings are needed.
B-1
C-1
Item
DOWNMIX
• If the sound distorts even when the volume is turned down, set "AUDIO ATT" to "ON" (page
68).
B-2 C-2 D
Item
DOWNMIX
DIGITAL OUT
You select
DOLBY SURROUND
You select
DOLBY SURROUND
ON
Page
68
Page
68
68
31