Canon PowerShot SD10 (PC1060) User Manual page 29

See SD Cards and Estimated Capacities (p. 156).
Handling Precautions for SD Cards
SD cards are high-precision electronic devices. Do not bend them, apply
force to them, or subject them to shocks or vibration.
Do not attempt to disassemble or alter the SD card.
Do not allow dirt, water or foreign objects to contact the terminals on the
back of the card. Do not touch the terminals with your hands or metal
objects.
Do not peel away the original label on the SD card or cover it with another
label or sticker.
When writing on the SD card, use a soft point pen (e.g. felt-tip pen). Using
a sharp point pen (e.g. ball-point pen) or pencil may damage the SD card or
corrupt the recorded data.
Since some or all of the data recorded on the SD card may be corrupted or
erased by electrical noise, static electricity or card malfunction, making a
backup copy of important data is recommended.
Moving an SD card rapidly between temperature extremes will cause
condensation to form in the card and lead to a malfunction. To avoid
condensation, place the SD card in a sealed plastic bag before moving it
into a different temperature zone and allow it to adjust slowly to the new
temperature.
If condensation forms on the SD card, store it at room temperature until the
water droplets have evaporated naturally.
Do not use or store SD cards in the following locations.
- Locations subject to dust or sand
- Locations subject to high humidity and high temperatures
Precaution for Multi Media Cards
This camera is designed to perform optimally when used with genuine
Canon-brand SD cards. You may use multi media cards (MMC) with this
camera. However, Canon makes no warranties concerning the use of
multi media cards (MMC).
27