To Immediately Erase the Displayed Image
1. Press the
button while the image is
displayed.
2. Confirm that [Erase] is selected and
press the SET button.
• Set the date and time if the Date/Time
menu appears (p. 28).
• You can change the language in which menus are displayed
(p. 30).
• To view the other images you have photographed, refer to the
Playback section (p. 87).
• After you finish using the camera, press the ON/OFF button to shut
the power off.
Focus (p. 43).
6
Aim the camera and lightly press (halfway)
the shutter button. Two beeps will sound
when the autofocus is set.
Shoot (p. 43).
7
Press the shutter button fully. You will hear
the sound of the shutter close when the
shot is complete.
View the recorded image (p. 55).
8
The recorded image displays for
approximately 2 seconds. To continue
displaying the image, keep the shutter
button pressed or hold the shutter button
until you press the SET button and then
release both.
15