Protecting Images - Canon PowerShot SD10 (PC1060) User Manual

Protecting Images

You can protect important images from accidental erasure.
Protection Icon
To cancel protection
After step 2, select an image to remove protection from and press the SET
button.
Please note that formatting (initializing) an SD card erases all data,
including protected images (p. 104).
Slide the mode switch to
1
(Playback).
In the (Play) menu, select
2
and press the SET button.
See Selecting Menus and Settings (p. 45).
Use the
3
image to protect and press the SET
button.
• The icon appears on protected images.
• You can make the selection of images
easier by toggling between single image
playback and index playback by holding
down the SET button.
Press the MENU button.
4
The Play menu displays again. Press it again
to return to the Playback screen.
or button to select an
101