Icom IC-T70A Service Manual page 17

5-2 TRANSMIT ADJUSTMENTS (Continued)
1) Select an adjustment item using [VOL].
2) Set or modify the adjustment value as specifi ed using [DIAL], then push [BAND] to store the adjustment value.
TRANSCEIVER'S
ADJUSTMENT
TX OUTPUT 1 • Frequency: Displayed
POWER (at 13.5 V) • Transmitting
[High power]
VHF (Low band)
VHF (High band) 2 • Transmitting
UHF (Low band) 3 • Transmitting
UHF (High band) 4 • Transmitting
[Middle power] 5 • Transmitting
VHF (Low band)
VHF (High band) 6 • Transmitting
UHF (Low band) 7 • Transmitting
UHF (High band) 8 • Transmitting
[Low power] 9 • Transmitting
VHF (Low band)
VHF (High band) 10 • Transmitting
UHF (Low band) 11 • Transmitting
UHF (High band) 12 • Transmitting
¤ CONNECTION
RF POWER METER
(10 W/50 Ω)
All manuals and user guides at all-guides.com
CONDITION
• Connect an RF power meter to the
antenna connector.
• POWER SUPPLY
OPERATION
AMMETER
(10 mA to 3 A)
To [DC IN]
− +
OPC-254L
Black
White
Fusese
(3A)
5 - 6
ADJUSTMENT
VALUE
ITEM
4.8–5.2 W
2.3–2.7 W
0.4–0.6 W
DC power supply
"13.5 V"
−
⊕