Icom IC-T70A Service Manual page 15

5-2 TRANSMIT ADJUSTMENTS (Continued)
1) Select an adjustment item using [VOL].
2) Set or modify the adjustment value as specifi ed using [DIAL], then push [BAND] to store the adjustment value.
TRANSCEIVER'S
ADJUSTMENT
TX OUTPUT 1 • Frequency: Displayed
POWER • Transmitting
(at 7.2 V)
[High power]
VHF (Low band)
VHF (High band) 2 • Frequency: Displayed
• Transmitting
UHF (Low band) 3 • Frequency: Displayed
• Transmitting
UHF (High band) 4 • Frequency: Displayed
• Transmitting
[Middle power] 5 • Frequency: Displayed
VHF (Low band) • Transmitting
VHF (High band) 6 • Frequency: Displayed
• Transmitting
UHF (Low band) 7 • Frequency: Displayed
• Transmitting
UHF (High band) 8 • Frequency: Displayed
• Transmitting
[Low power] 9 • Frequency: Displayed
VHF (Low band) • Transmitting
VHF (High band) 10 • Frequency: Displayed
• Transmitting
UHF (Low band) 11 • Frequency: Displayed
• Transmitting
UHF (High band) 12 • Frequency: Displayed
• Transmitting
¤ CONNECTION
RF POWER METER
(10 W/50 Ω)
All manuals and user guides at all-guides.com
CONDITION
• Connect an RF power meter to the
antenna connector.
• POWER SUPPLY
AMMETER
OPERATION
+
+ −
+ –
DC power supply
6–10 V/3 A
5 - 4
ADJUSTMENT
VALUE
ITEM
4.8–5.2 W
2.3–2.7 W
0.4–0.6 W
VOLTAGE METER
"7.2 V"
+ −
–