Introduction; About This Guide - RuggedCom RuggedMAX WiN7013 Installation Manual

1. Introduction

1. Introduction
The WiN7000 High Power Base Station is a member of the RuggedMAX™ family, a line of mobile
WiMAX broadband wireless access systems based on the 802.16e mobile WiMAX standard.
RuggedMAX systems are designed for robustness and simplicity, offering feature-rich services
with low deployment and operation costs.
The WiN7000 High Power Base Station is a member of a line of mobile WiMAX broadband wireless
access systems based on the 802.16e mobile WiMAX standard. These systems are designed for
robustness and simplicity, offering feature-rich services with low deployment and operation costs.
The WiN7000 High Power Base Station is a cost-effective solution for wireless access services,
designed for point-to-multipoint broadband wireless access applications in varying conditions and
locations. The WiN7000 High Power Base Station is a one-sector base station, supporting up to
800 subscriber units. Through the addition of routing units, the system can be extended to as
many sectors as required and can support additional subscribers and bandwidths.
The base station communicates with fixed and mobile subscriber units, according to defined
service criteria and customer service level agreements. The WiN7000 High Power Base Station
also connects to the service provider backbone, supporting end-to-end Quality of Service (QoS)
requirements.
The system uses OFDMA radio technology, providing robustness in adverse channel conditions
and enabling Non-Line-Of-Sight (NLOS) operation. This improves coverage and maintains a high
level of spectral efficiency. Modulation and coding are continuously adapted to prevailing link
conditions, ensuring an optimal balance between robustness and efficiency. The use of STC/
MRC and MIMO radio technologies optimizes link performance, ensuring enhanced bandwidth
and service coverage.
The RuggedMAX™ WiN7000 High Power Base Station is a full outdoor base station, designed for
easy installation and mounting on poles, street lamps, towers, or walls. The WiN7000 High Power
Base Station can be equipped with copper or fibre network interfaces for flexible integration into
the operator's backbone.
The WiN7000 High Power Base Station is supported by RuggedNMS™, RuggedCom's
comprehensive Network Management System.

1.1. About this Guide

This installation guides describes the installation of the RuggedMAX™ WiN7000 High Power Base
Station.
This guide is intended for use by base station installers and operators, and assumes readers have
a working knowledge of WiMAX technologies and procedures. While some safety precautions
are reviewed here, it is assumed that installers are trained in safe installation practices. Users
unfamiliar with safe installation procedures, WiMAX technologies, and service procedures should
not rely on this manual for comprehensive guidance.
RuggedCom® RuggedMAX™ 7 Installation Guide Rev 1.1