Table of Contents
Advertisement
3. Installation Procedures
The cavity filter mounting kit provides the following mounting options:
• Pole mounting: Attach the filters to any pipe or pole with a diameter of 1.75" to 10".
• Wall mounting: Attach the filters to any wall that can support the weight of the filters and
mounting bracket.
Procedure 3.3. Assembling and Connecting Cavity Filters
1.
Position the cavity filters (Item 1 × 2) on the baseplate (Item 2).
2.
Secure the filters to the baseplate using Flat Washer (M5), Spring Washer (M5), and Hex Nut
(M5) (Items 3, 4, and 5 × 8).
Figure 3.8. A+B Band Cavity Filters Mounted on Baseplate
RuggedCom® RuggedMAX™
23
Installation Guide Rev 1.1
Advertisement
Table of Contents
