Using A Bi-Amplifier Connection - Sony STR-DH700 Operating Instructions Manual

Recording onto a recording
media
1
Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2
Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
3
Prepare the recording
component.
Insert a blank video tape, etc. into the
recording component (VIDEO 1) for
recording.
4
Start recording on the
recording component, then
start playback on the playback
component.
Note
Some sources contain copy guards to prevent
recording. In this case, you may not be able to record
from the source.
86 GB
Using a bi-amplifier
connection
If you are not using surround back speakers,
you can connect the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals using a bi-amplifier
connection.
To connect speakers
Front speaker
(R)
Hi
ANTENNA
AM
EZW-T100
TV DIGITAL
Lo
SAT DVD VIDEO 1 MONITOR
IN IN IN OUT DMPORT
DC5V
Y 0.7A MAX
IN
OPTICAL OPTICAL
P B /
C
B
VIDEO VIDEO VIDEO VIDEO VIDEO
IN IN OUT IN OUT
P R /
R C
COMPONENT VIDEO MONITOR
AUDIO AUDIO AUDIO AUDIO
OUT IN IN IN IN OUT IN
L
AUDIO
OUT
R
SA-CD/CD/CD-R TV SAT BD VIDEO 1 SUBWOOFER
SURROUND BACK/
BI-AMP/
CENTER
FRONT B
R L
SPEAKERS
Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers. Not doing so may cause a
malfunction of the receiver.
Front speaker
(L)
HDMI
SAT IN DVD IN BD IN OUT
(ASSIGNABLE)
SAT DVD
IN IN
COAXIAL
FRONT A
SURROUND BACK/
BI-AMP/
CENTER SURROUND L
FRONT B
R L R L
R
SPEAKERS
FRONT A
SURROUND
L
R L
R
Hi
Lo