Using A Bi-Amplifier Connection - Sony STR-DA2800ES Operating Instructions Manual

Switching the command mode of
the remote control
RM SET
UP
SHIFT
1, 2
1
Press ?/1 while pressing RM
SET UP.
The SHIFT button lights,and the RM SET
UP button flashes.
2
Press the numeric button 1 or 2
while the RM SET UP button is
flashing.
When you press 1, the command mode is
set to COMMAND MODE AV1. When
you press 2, the command mode is set to
COMMAND MODE AV2.
The RM SET UP button lights up.
3
Press ENT/MEM.
The RM SET UP button flashes twice,
then the command mode setting process
is completed.
88
US
Using a bi-amplifier
connection
If you are not using surround back speakers
?/1
and front high speakers you can use the
SURROUND BACK/FRONT HIGH/
FRONT B/ZONE 2 terminals for the front
speakers for use with a bi-amplifier
connection.
To connect speakers
ENT/
MEM
Front speaker
(R)
Hi
Lo
Connect the jacks on the Lo (or Hi) side of the
front speakers to the FRONT A terminals, and
connect the jacks on the Hi (or Lo) side of the
front speakers to the SURROUND BACK/
FRONT HIGH/FRONT B/ZONE 2 terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers to avoid receiver malfunction.
Front speaker
(L)
Hi
Lo