Table of Contents
Advertisement
According to the use of the appliance, the
approximate number of hours is as follows:
Hardness
°dH
level
1
0 - 11
2
12 - 17 21 - 30 25 - 30
3
18 - 24 31 - 42 15 - 20
4
25 - 30 43 - 53 12 - 15
5
31 - 50 54 - 90
Demo Mode (for showrooms only)
The same as Show Room, when
this mode is activated, after a
certain period of inactivity, a
demonstration of the various
screens that illustrate the potential
of the appliance is shown on the
display.
1. Select
Demo Mode.
2. Select On.
3. Touch the CONFIRM
activate Demo Mode.
To use the appliance normally, set
this mode to Off.
Use
°dF
Hours
0 - 20
35 - 40
8 - 10
button to
Time display
Activates/deactivates the clock
display when the oven is switched
off.
1. Select
Show the time.
2. Select On.
3. Touch the CONFIRM
activate the time display.
The Show the time function is
factory set to Off.
If the Show the time function is set
to On, when the appliance is in
standby it displays the current time
at low brightness.
When the Show the time function
is set to On, the appliance
consumes more energy than in
stand-by mode.
Only for SmegConnect models: If
the Show the time function is set to
Off the connectivity switches off
automatically when the clock goes
into stand-by.
button to
167
Advertisement
Table of Contents
