Table of Contents
Advertisement
Pyrolytic function setting
1. Select one of the cleaning functions
or
with the function knob.
2. Turn the temperature knob to the right or
to the left to set the cleaning cycle
duration from a minimum of 2 hours to a
maximum of 3 hours (except for the
function whose duration is 120 minutes).
3. Press the temperature knob to start the
pyrolytic cycle.
Recommended pyrolytic cycle
duration:
• Light dirt: 2 hours.
• Medium dirt: 2 ½ hours.
• Heavy dirt: 3 hours.
Pyrolytic cycle
1. The display shows
the remaining time to indicate that the
appliance is carrying out the automatic
cleaning cycle.
2. Two minutes after the pyrolytic cycle has
started the door is locked (the door lock
indicator light
device that prevents the door from being
opened.
46
Cleaning and maintenance
or
and
comes on) by a
It is not possible to select any
function once the door lock device
has been activated.
3. At the end of the pyrolytic cycle, the door
remains locked as long as the
temperature inside the oven cavity returns
to safety levels. Wait for the oven to cool
down and collect the residue deposited
inside it using a damp microfibre cloth.
During the first pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
If the pyrolytic cycle gives
unsatisfactory results at minimum
duration, it is recommended to set
a longer time for successive
cleaning cycles.
Advertisement
Table of Contents
