Table of Contents
Advertisement
Vapor Clean cycle setting
If the internal temperature is
greater than that required for the
Vapor Clean cycle, the cycle will
be stopped immediately and the
message
on the display. Let the appliance
cool down before activating the
assisted cleaning cycle.
1. Press and turn the function knob to select
the Vapor Clean function
duration and temperature of the cleaning
cycle will appear on the display.
The temperature and time
parameters cannot be modified by
the user.
2. Press the function knob to start the
automatic cleaning cycle.
44
Cleaning and maintenance
will appear
. The
Programmed Vapor Clean cycle
Like for the normal cooking functions, it is
also possible to set an end time for the
Vapor Clean function.
1. After selecting the Vapor Clean function,
press the temperature knob. The
indicator light
display shows the function end time.
2. Turn the temperature knob right or left to
delay the cooking end time.
3. Press the temperature knob to confirm the
function end time.
4. Press the function knob. The appliance
waits for the set start time.
starts flashing. The
Advertisement
Table of Contents
