5: Preparing The Receiver And The Remote - Sony HT-DDW780 Operating Instructions Manual

5: Preparing the receiver
and the remote
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
AC power cord
R L
+
R L
FRONT
Note
Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
24 GB
To the wall outlet
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1,2
DISPLAY DIMMER
?/1
AUTO CAL MIC MEMORY +
PRESET TUNING
VIDEO 1 VIDEO 2
FM MODE TUNING +
PHONES
1
Press ?/1 to turn off the
receiver.
2
Hold down ?/1 for 5 seconds.
"PUSH" and "ENTER" appears on the
display alternately.
3
Press ENTER.
After "CLEARING" appears on the
display for a while, "CLEARED"
appears.
The following items are reset to their
factory settings.
• All settings in the LEVEL, TONE,
SUR, TUNER, AUDIO and SYSTEM
menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names for inputs and preset
stations.
• MASTER VOLUME is set to "VOL
MIN".
• Input is set to "DVD".
2CH A.F.D. MOVIE
AMP MENU ENTER
DVD SA-CD/CD FM AM
INPUT MODE
3
MUSIC
MASTER
VOLUME