6: Preparing The Receiver And The Remote - Sony Digital Duplicator Operating Instructions Manual

6: Preparing the receiver
and the remote
Setting the voltage selector
If your receiver and subwoofer has a voltage
selector on the rear panel, check that the
voltage selector is set to the local power supply
voltage. If not, use a screwdriver to set the
selector to the correct position before
connecting the AC power cord to a wall outlet.
Receiver
VOLTAGE
SELECTOR
Subwoofer
VOLTAGE SELECTOR
220V
120V
28
GB
240V
220V
120V
240V
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
AC power cord
FRONT
L
R
To the wall outlet