Table of Contents
Advertisement
About the indicators on the display
1
2
3
SP
LFE
SW
L
C
R
SL S SR
qf
Name
Function
A SW
Lights up when audio signal is
output from the SUB WOOFER
jack.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C SP
Lights up when the receiver is
turned on. This indicator does
not light up if a headphone is
connected to the PHONES jack.
D ;DIGITAL
Lights up when Dolby Digital
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to "ANALOG" (page 52).
E ; PRO
"; PRO LOGIC" lights up
LOGIC (II)
when the receiver applies Pro
Logic processing to 2 channel
signals in order to output the
center and surround channel
signals. "; PRO LOGIC II"
lights up when the Pro Logic II
Movie/Music decoder is
activated.
Note
Dolby Pro Logic and Dolby Pro
Logic II decoding do not
function for DTS format
signals.
6
GB
4
5
;
;
DIGITAL
PRO LOGIC II
SLEEP OPT COAX
qd
qs
qa
6
DTS
D.RANGE
q;
Name
Function
F DTS
Lights up when DTS signals are
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
"ANALOG" (page 52).
G MEMORY
Lights up when a memory
function, such as Name Input,
Preset Memory (page 49), etc.,
is activated.
H Preset
Lights up when using the
station
receiver to tune in radio stations
indicators
you have preset. For details on
presetting radio stations, see
page 48.
I Tuner
Lights up when using the
indicators
receiver to tune in radio stations
(page 46), etc.
Note
"RDS" appears for models of
area code CEL, CEK only.
J D.RANGE
Lights up when dynamic range
compression is activated (page
34).
K COAX
Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the COAXIAL
jack, or when INPUT MODE is
set to "COAX IN" (page 52).
L OPT
Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the OPTICAL
jack, or when INPUT MODE is
set to "OPT IN" (page 52).
7
RDS
MEMORY
STEREO MONO
9
8
Advertisement
Table of Contents
