Table of Contents
Advertisement
2.5 Installing the Processor and Heatsink
The types of processors supported by the S5548 are listed in the 1.2 Hardware
Specifications section on page 4. Check our website at
the latest list of validated Intel
NOTE:
MiTAC is not liable for damage as a result of operating an
unsupported configuration.
Processor Installation (for Intel Skylake D-2100 series CPU)
When you receive the motherboard, both Intel
and heat sinks have been installed in advance in the factory.
Please note that the motherboard may not look exactly like the one you purchased.
Therefore, the illustrations should be held for your reference only.
Heat sink Installation
The CPU heat sink will ensure that the processor do not overheat and continue to
operate at maximum performance for as long as you own them. An overheated
processor is dangerous to the motherboard. The processors will overheat within
seconds, enter thermal protection, and shut down if heat sinks are not installed.
NOTE:
The heat sink also has been preinstalled, so the S5548 motherboard when
you received has been installed with CPU and heat sink.
For the safest method of installation and information on choosing the appropriate
heat sink, using heat sinks validated by Intel
http://www.intel.com
®
processors for this specific motherboard.
®
®
22
http://www.tyan.com
http://www.tyan.com
Skylake D-2100 series processors
. Please refer to the Intel
for
®
website:
Advertisement
Table of Contents
