Installing The Processor And Heatsink - TYAN S5552 Manual

2.5 Installing the Processor and Heatsink

The types of processors supported by the S5552 are listed in the 1.2 Hardware
Specifications section on page 4. Check our website at
the latest list of validated Intel
NOTE: MiTAC is not liable for damage as a result of operating an
unsupported configuration.
Processor Installation (Single Socket H4 LGA1151 Coffee Lake-S)
Follow the steps below to install the processors and heat sinks.
Please note that the illustrations are based on LGA1151 socket H4 which may not
look exactly like the motherboard you purchased. Therefore, the illustrations should
be held for your reference only.
NOTE: Please save and replace the flip CPU protection cap when returning for
service.
1. Remove the CPU protection cap.
cap if the processor is removed from its socket.
2. Open the socket lever.
3. Open the CPU socket cover to the fully position.
®
processors for this specific motherboard.
NOTE: Save and replace the CPU protection
26
http://www.tyan.com
http://www.tyan.com for