Table of Contents
Advertisement
2.6 Installing the Processor and Heatsink
The types of processors supported by the S5642 are listed in the 1.2 Hardware
Specifications section on page 4. Check our website at
the latest list of validated Intel
NOTE:
MiTAC is not liable for damage as a result of operating an
unsupported configuration.
Processor Installation (Single Socket LGA4189 for Intel Icelake CPU)
Follow the steps below to install the processors and heat sinks.
Please note that the illustrations are based on LGA4189 socket which may not look
exactly like the motherboard you purchased. Therefore, the illustrations should be
held for your reference only.
NOTE:
Please save and replace the flip CPU protection cap when returning for
service.
1.
Align the triangle edge of the carrier with the notch on the edge of the bottom
of the heatsink and make sure the latches are snapped under the edge of the
heatsink.
2.
Align and install the processor on the carrier. Make sure the gold arrow is
located in the correct direction.
®
processors for this specific motherboard.
31
http://www.tyan.com
http://www.tyan.com
for
Advertisement
Table of Contents
