Installing A Board - Fujitsu Esprimo C series Operating Manual

Installing a board

Do not throw the slot cover away. If you remove the board again, you
will need to install the slot cover again (cooling, fire protection or EMC
regulations which need to be complied with).
2
A26361-K1002-Z220-1-7619, edition 2
2
1
1
► Open the casing (see
casing", Page 29).
► Open the retaining clip (1).
► Slide the slot cover upward out of
the casing (2).
► Make the required settings on the board.
► Guide the board into the slot recess (1).
► Close the retaining clip (2).
► If necessary, connect the cables
to the module.
System expansions
"Opening the
31