Getting Started; Unpacking; Inserting Batteries Into The Remote - Sony DAV-SB300 Operating Instructions Manual

Getting Started

Unpacking

Check that you have the following items:
• Speakers (5)
• Subwoofer (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (3.5m × 3, 10m × 2)
• Video cord (1)
• Remote Commander (remote) RM-SP240 (1)
• Size AA (R6) batteries (2)
• Foot pads (4)
• Operating Instructions
• Speakers-connection and Installation (card)
(1)
Inserting Batteries into
the Remote
You can control the system using the supplied
remote. Insert two size AA (R6) batteries by
matching the 3 and # ends on the batteries to
the markings inside the compartment. When
using the remote, point it at the remote sensor
on the system.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from
the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of
time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
11 GB